51.2V 50Ah Stack LiFePO4 Battery

General Information

The "51.2V 100Ah Rack-mounted Lithium Energy Storage Battery" features the following specifications:

Product: Rack-Mounted Lithium Iron Phosphate Battery

Model: 51.2V 100Ah

Specifications:

- Voltage: 51.2 volts (V)

- Capacity: 50 ampere-hours (Ah)

- Configuration: Stacked or series-connected lithium cells

- Cycle Life: >6000 Cycles(80%DOD)

- Operating Temperature Range:-20-55°C

- Dimensions: 550*400*225mm

- Weight: 27kg

- Certification: Complies with relevant safety and environmental standards, such as UN38.3, IEC 62133, and others depending on the application.

Please note that these specifications can vary depending on the specific manufacturer and model of the battery. It's essential to consult the product documentation or the manufacturer's specifications for precise details when considering a specific 51.2V 50Ah lithium battery for your application.

Cell Dimensions

Cell Technical Data

• Intelligent factory design, high performance consistency;

• Square aluminum shell, high-precision explosion-proof valve, high safety performance;

• Low internal resistance, high discharge rate and stable discharge platform;

• Long cycle life, the capacity retention ratio exceeds 80% after 6000 cycles @ 0.5C/1C4

Note: The range for stacking battery modules is from 1 to 6 modules.

Precautions

When using a 51.2V 50Ah stacked lithium battery, it's crucial to follow safety guidelines and take preventive measures to ensure safe operation. Here are some important precautions and preventive measures:

1. Charge and Discharge:

- Only use a compatible charger designed for the specific battery model.

- Do not overcharge or over-discharge the battery, as it can lead to performance degradation or safety hazards.

- Follow the manufacturer's recommended charging and discharging parameters.

2. Temperature Management:

- Operate the battery within the recommended temperature range. Avoid extreme heat or cold conditions, as they can affect performance and safety.

- Monitor the battery's temperature during operation, especially when charging or discharging at high currents.

3. Physical Protection:

- Ensure the battery is properly secured within your application to prevent physical damage.

- Protect the battery from punctures, impacts, or crushing.

4. Battery Management System (BMS):

- If available, use a Battery Management System (BMS) to monitor the battery's status, balance individual cells, and provide protection against overcharging or over-discharging.

5. Avoid Short Circuits:

- Prevent short circuits by using proper connectors and insulating the battery terminals.

- Store the battery in a safe place away from conductive materials when not in use.

6. Transport and Storage:

- Comply with transportation regulations for lithium batteries. They are often subject to specific guidelines to prevent damage and thermal runaway during transit.

- Store the battery in a cool, dry place, away from direct sunlight, and in a well-ventilated area.

7. Emergency Procedures:

- Be prepared for emergencies. Have a fire extinguisher suitable for lithium battery fires nearby.

- If the battery exhibits any signs of damage, overheating, or abnormal behavior, disconnect it from the device and place it in a safe, non-flammable container.

8. Dispose of Properly:

- Follow local regulations for the disposal of lithium batteries. They should be recycled or disposed of in an environmentally responsible manner.

9. Manufacturer's Guidelines:

- Always follow the manufacturer's instructions and recommendations for the specific battery model.

10. Training and Awareness:

- Ensure that anyone handling or maintaining the battery is trained and aware of the associated risks and safety procedures.

Remember that improper use or mishandling of lithium batteries can result in fire, explosion, or other safety hazards. Taking these precautions and preventive measures is essential for safe and efficient operation of your 51.2V 50Ah stacked lithium battery.