17.92kWh 358.4V 50Ah LiFePO4 Battery

General Information

The specifications for the HS102-256 HV energy storage system:

• Model: HS102-256 HV

• Battery Module: HS-BM256 (2.56 kWh, 51.2V, 28kg)

• Number of Modules: 7

• Total Battery Capacity: 17.92 kWh

• Nominal Voltage: 358.4V

• Operating Voltage Range: 330.4~397.6V

• Dimensions (W/D/H): 526*350*1120mm

• Weight: 219kg

• Battery Type: Lithium Iron Phosphate (LFP)

• Installation: Ground-mounted

• Protection Rating: IP65

• Standard Charge/Discharge Current: 25A/0.5C

• Operating Temperature: -10 to 50°C

• Battery Lifespan: 10 years

• Battery Management System Controller: HS50-BP720

• Weight: 15kg

• Communication Port: CAN

• Dimensions (W/D/H): 526/350/130mm

• Monitored Parameters: State of Charge (SOC), System Voltage, Current, Cell Voltage, Cell Temperature

• Certifications: IEC62619 (Battery & Battery Systems), CE, CB, UN38.3

This energy storage system combines advanced battery technology with robust design and monitoring capabilities, making it suitable for various applications.

Cell Dimensions

Cell Technical Data

• Intelligent factory design, high performance consistency;

• Square aluminum shell, high-precision explosion-proof valve, high safety performance;

• Low internal resistance, high discharge rate and stable discharge platform;

• Long cycle life, the capacity retention ratio exceeds 80% after 6000 cycles @ 0.5C/1C

Precautions

When using the HS102-256 HV lithium battery system, it is essential to adhere to the following precautions and safety measures:

1. Installation by Professionals: Ensure that the system is installed by qualified professionals familiar with lithium battery technology and local regulations. Incorrect installation may lead to safety hazards.

   
   

2. Operating Temperature Range: The system operates within a specified temperature range (-10 to 50°C). Avoid exposing it to extreme temperatures outside this range, as it may affect performance and safety.

   
   

3. Ventilation: Provide proper ventilation in the installation area to dissipate heat generated during operation. Overheating can impact battery life and safety.

   
   

4. IP65 Protection: Maintain the IP65 protection rating by preventing exposure to water and dust. Install the system in a dry and clean environment to prevent damage.

   
   

5. Charge and Discharge Limits: Adhere to the recommended standard charging and discharging currents (25A/0.5C). Exceeding these limits may compromise the safety and longevity of the battery.

   
   

6. Monitoring Parameters: Regularly monitor key parameters such as state of charge (SOC), system voltage, current, cell voltage, and cell temperature using the provided HS50-BP720 controller. Any unusual readings should be addressed promptly.

   
   

7. Emergency Procedures: Establish emergency procedures in case of malfunction or abnormal behavior. Familiarize yourself with shutdown protocols and contact the manufacturer or installer for support.

   
   

8. Avoid Physical Damage: Prevent physical damage to the battery modules and control unit. Any damage may compromise the integrity of the system and pose safety risks.

   
   

9. Compliance with Standards: Ensure compliance with relevant standards, such as IEC62619, CE, CB, and UN38.3. Non-compliance may void warranties and compromise safety.

   
   

10. Regular Maintenance: Schedule regular maintenance checks and inspections as recommended by the manufacturer. This includes verifying connections, updating firmware, and ensuring the overall integrity of the system.

By following these guidelines, users can maximize the performance, safety, and lifespan of the HS102-256 HV lithium battery system in a residential setting.