Color: | |
---|---|
Voltage: | |
Capacity(Ah): | |
Capacity(Wh): | |
Availability: | |
12V 250Ah LiFePO4 Battery
HelithTech
Product Description
Specifications of the 12V 250Ah Energy Storage Lithium Battery:
- Voltage: 12 volts
- Capacity: 250 ampere-hours (Ah)
- Chemistry: Lithium Iron Phosphate (LiFePO4) or Lithium Nickel Manganese Cobalt Oxide (NMC)
- Cycle Life: Varies based on factors such as depth of discharge, charge/discharge rate, and operating temperature
- Application: Energy storage for solar systems, grid stabilization, backup power
- Charging Method: Follow manufacturer's guidelines for optimal charging parameters
- Safety Features: Built-in protection circuits, temperature sensors
- Maintenance: Regular monitoring of battery status, balancing, temperature control
- Parallel/Serial Configuration: Can be connected in parallel for increased capacity or in series for higher voltage
- Dimensions: 522x240x218mm
- Weight: 25KG
- Operating Temperature: Typically recommended within a certain temperature range for optimal performance and safety
Please note that specific specifications may vary based on the manufacturer and model of the battery. Always refer to the manufacturer's documentation for accurate and up-to-date information.
Battery Cell
The biggest advantage of prismatic cells is its thin profile, lightweight, and the effective use of space. Due to the rectangle shape of these cells, it can facilitate better layering and increase flexibility in the products. With big capacity, less cell assembled together makes monitoring on each battery cell instead of cell string become possible. Changing defective battery cell is feasible too when there is cell failure.
Item | Parameter | Size |
A | Height | 240 mm |
B | Width | 215 mm |
C | Length | 523 mm |
D | Weight | 23 kg |
Intelligent factory design, high performance consistency;
Square aluminum shell, high-precision explosion-proof valve, high safety performance;
Low internal resistance, high discharge rate and stable discharge platform;
Long cycle life, the capacity retention ratio exceeds 70% after 4000 cycle @ 0.5C/1C
# | Item | Parameter | Remark | |
1 | Rated Capacity | 250Ah | Standard discharge(0.2 C5) After standard charge(0.2 C5) | |
2 | Minimal Rated Capacity | 248Ah | ||
3 | Nominal Voltage | 12V | working voltage | |
4 | Discharge cut-off voltage | ≥8V | 10.0V(recommended) | |
5 | Charging cut-off voltage | ≤15.6V | 14.6V (recommended) | |
6 | Standard charge | 0.2C constant current(CC) charge to 14.6V, then constant voltage (CV)14.6V charge till charge current decline to ≤0.05C | Charge time : Approx 6h | |
7 | Standard discharge | Constant current 0.2C Cut-off voltage 10.0V | ||
8 | Maximum Charge Current | 250A | ||
9 | Max Continuous Discharge Current | 250A | ||
10 | Peak current | 500A | ||
11 | Operation Conditions | Charge | 0~45℃ | 60±25%R.H. 23 ± 5°C(recommended) |
Discharge | -10~60℃ | |||
12 | Storage Conditions | Less than 1 year : 0~25℃ | 60±25%R.H. at the shipment state | |
Less than 3 months:-10~35℃ |
Precautions
Charging Parameters: Follow the manufacturer's recommended charging parameters to prevent overcharging or undercharging, which could affect battery performance and lifespan.
Operating Temperature: Maintain the battery within the specified temperature range to ensure optimal performance and safety. Extreme temperatures can impact both charging efficiency and battery life.
Depth of Discharge: Avoid deep discharges whenever possible, as frequent deep cycling can reduce the overall cycle life of the battery. Shallower discharges tend to prolong battery longevity.
Maintenance: Regularly monitor battery status, balancing, and temperature. Perform maintenance checks according to the manufacturer's guidelines to identify and address any potential issues.
Safety Precautions: Handle the battery with care, as improper handling can lead to safety hazards. Follow recommended safety practices and keep the battery away from heat sources, open flames, and water.
Parallel/Serial Connection: If connecting batteries in parallel or series, ensure proper matching and balanced charging to avoid imbalances and potential damage.
Transportation and Storage: Follow transportation regulations and proper storage guidelines to prevent damage during transit and storage periods.
Quality Assurance: Purchase batteries from reputable manufacturers and distributors to ensure product quality, performance, and safety.
Disposal and Recycling: Properly dispose of or recycle batteries according to local regulations and guidelines to minimize environmental impact.
Manufacturer Guidelines: Always refer to the manufacturer's documentation for specific recommendations on installation, usage, and maintenance.
Please note that these considerations are general guidelines. Specific instructions may vary based on the battery's manufacturer and model.