15.36kWh 3 Pcs Module Stack LiFePO4 Energy Storage System Battery

General Information

Here are the specifications for the 51.2V 300Ah 3-battery module stacked energy storage lithium-ion battery:

- Nominal Voltage: 51.2V

- Capacity: 100Ah

- Module Number: 3Pcs

- Chemistry: LiFePO4

- Battery Cell: 3.2v100Ah

- Battery Module: 5.12kWh

- Nominal voltage: 51.2V

- Cycle life: >6000 Cycles(80%DOD)

- Protection level: IP20

- Communication method: CAN，RS485

These specifications describe a 51.2V lithium-ion battery system with a capacity of 300 ampere-hours, achieved by stacking three battery modules. This battery is commonly used in energy storage applications like solar and wind energy systems.

Cell Dimensions

Cell Technical Data

• Intelligent factory design, high performance consistency;

• Square aluminum shell, high-precision explosion-proof valve, high safety performance;

• Low internal resistance, high discharge rate and stable discharge platform;

• Long cycle life, the capacity retention ratio exceeds 80% after 6000 cycles @ 0.5C/1C4

Note: The range for stacking battery modules is from 1 to 6 modules.

Precautions

When using a lithium-ion battery like the 51.2V 300Ah 3-battery module stacked energy storage lithium-ion battery, it's important to follow safety precautions and guidelines to ensure safe operation. Here are some general precautions and preventive measures:

1. Proper Charging:

- Always use a charger specifically designed for lithium-ion batteries and follow the manufacturer's charging recommendations.

- Avoid overcharging or undercharging the battery, as it can lead to safety hazards or reduced battery lifespan.

2. Temperature Control:

- Operate the battery within the recommended temperature range. Extreme temperatures can affect performance and safety.

- Store the battery in a cool, dry place, away from direct sunlight or heat sources.

3. Avoid Physical Damage:

- Protect the battery from physical shocks or impact, as it can damage the internal cells or connections.

- Use suitable protective enclosures or housings if required by the application.

4. Ventilation:

- Ensure proper ventilation when using the battery to prevent heat buildup, which can be harmful to the battery.

5. Balancing:

- If the battery consists of multiple modules, monitor and balance the cells regularly to ensure even voltage levels across all modules.

6. Safety Circuits:

- Utilize battery management systems (BMS) that provide overcharge, over-discharge, and thermal protection.

7. Avoid Overdischarge:

- Prevent the battery from being discharged below its recommended voltage limit, as it can damage the battery and reduce its lifespan.

8. Transportation:

- Follow regulations and guidelines for transporting lithium-ion batteries, especially when shipping or moving them.

9. Regular Inspection:

- Periodically inspect the battery for any signs of damage, leakage, or swelling. If you notice any issues, discontinue use and consult the manufacturer.

10. Dispose Properly:

- Dispose of the battery according to local regulations and recycling programs for lithium-ion batteries. Do not incinerate or puncture the battery.

11. Training and Education:

- Ensure that individuals handling and maintaining the battery are properly trained and educated on lithium-ion battery safety.

12. Emergency Response:

- Have a plan in place for dealing with battery-related emergencies, such as fires or leaks, and provide appropriate fire-extinguishing equipment.

These precautions and preventive measures are crucial for maintaining the safety and longevity of the lithium-ion battery and for minimizing potential risks associated with its use. Always refer to the manufacturer's guidelines and instructions for specific safety recommendations related to your battery model.