51.2V 100Ah Stack LiFePO4 Energy Storage System Battery

General Information

The specifications for the Hive L50-1 lithium iron phosphate (LiFePO4) battery:

• Model: Hive L50-1

• Nominal Capacity: 5.12 kWh

• Module Number: 1 piece

• Dimensions: 621 x 233.5 x 557 mm

• Weight: 87 kg

• Chemistry: LiFePO4 (Lithium Iron Phosphate)

• Capacity per Cell: 100 Ah

• Battery Module Capacity: 5.12 kWh

• Nominal Voltage: 51.2 V

• Operating Voltage: 40~58.4 V

• Max Charge/Discharge Current: 100 A

• Cycle Life: ≥70% of initial capacity for 5000 cycles

• Communication Method: CAN, 485

• Operating Charging Temperature Range: 0~55°C

• Operating Discharging Temperature Range: -20~55°C

• Storage Temperature Range: -20~40°C

• Humidity: ≤95% non-condensing

• Altitude: <4500 m

• Protection Level: IP20

• Cooling Method: Free Cooling

• Quality Guarantee: 10 years or cycle life, whichever comes first.

Cell Dimensions

Cell Technical Data

• Intelligent factory design, high performance consistency;

• Square aluminum shell, high-precision explosion-proof valve, high safety performance;

• Low internal resistance, high discharge rate and stable discharge platform;

• Long cycle life, the capacity retention ratio exceeds 80% after 6000 cycles @ 0.5C/1C4

Note: The range for stacking battery modules is from 1 to 6 modules.

Precautions

When using the Hive L503 lithium iron phosphate (LiFePO4) battery, it is important to observe certain precautions and implement protective measures for safe operation. Here are some guidelines:

1. Installation:

• Ensure proper installation by following the manufacturer's guidelines and recommendations.

• Install the battery in a well-ventilated area, away from direct sunlight and extreme temperatures.

2. Temperature Management:

• Operate the battery within the specified temperature ranges: 0~55°C for charging, -20~55°C for discharging, and -20~40°C for storage.

• Avoid exposing the battery to conditions outside the recommended temperature range.

3. Communication and Monitoring:

• Utilize the CAN and 485 communication methods for effective monitoring of the battery status.

• Regularly check and monitor the battery parameters to ensure optimal performance.

4. Voltage Limits:

• Operate the battery within the specified nominal voltage range of 40~58.4 V to prevent overcharging or excessive discharge.

5. Charge/Discharge Current:

• Adhere to the maximum charge/discharge current limit of 100A to avoid stressing the battery and ensure longevity.

6. Humidity Control:

• Maintain a humidity level below 95% to prevent condensation and potential damage to electronic components.

7. Altitude Considerations:

• Use the battery at altitudes below 4500 meters to ensure proper functioning.

8. Protection Level:

• Recognize the IP20 protection level and take necessary precautions to shield the battery from environmental factors.

9. Cooling System:

• Ensure that the free cooling system is operational to prevent overheating. Monitor the ambient temperature to avoid exceeding operational limits.

10. Quality Guarantee:

• Be aware of the 10-year quality guarantee or cycle life, whichever comes first. Consider the warranty terms for potential replacements or maintenance.

11. Safety Measures:

• Exercise caution during handling and avoid physical damage to the battery.

• Familiarize yourself with emergency procedures in case of malfunctions or abnormal behavior.

By adhering to these precautions and protective measures, users can enhance the safety, efficiency, and longevity of the Hive L503 lithium iron phosphate battery in residential energy storage applications. Always consult the product manual and guidelines provided by the manufacturer for specific details and instructions.